Difference between revisions of "2016 November"

From EOVSA Wiki
Jump to: navigation, search
Line 5: Line 5:
  
 
= Nov 05 =
 
= Nov 05 =
03:41 UT Found a potential problem DELAYCAL_END.ctl, so took another two sets of data.  '''Still bad!'''
+
03:41 UT Found a potential problem in DELAYCAL_END.ctl, so took another two sets of roachcal.scd data.  '''Still bad!'''
  
 
04:14 UT Started roachcal.scd for another set of data.  After studying schedule.py, another problem was found.  DELAYCAL_END command has to have CIEL-2 as second value on the line, otherwise source id is set to None!  '''Yay! It finally worked!'''
 
04:14 UT Started roachcal.scd for another set of data.  After studying schedule.py, another problem was found.  DELAYCAL_END command has to have CIEL-2 as second value on the line, otherwise source id is set to None!  '''Yay! It finally worked!'''

Revision as of 04:35, 5 November 2016

Nov 04

19:18 UT Reboot ROACHes to clear fault light and test whether large delays are still present. They were power-cycled and reloaded.

19:24 UT Started roachcal.scd to take packet capture data for checking delays. Still bad!

Nov 05

03:41 UT Found a potential problem in DELAYCAL_END.ctl, so took another two sets of roachcal.scd data. Still bad!

04:14 UT Started roachcal.scd for another set of data. After studying schedule.py, another problem was found. DELAYCAL_END command has to have CIEL-2 as second value on the line, otherwise source id is set to None! Yay! It finally worked!