2016 November: Difference between revisions

From EOVSA Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 7: Line 7:
03:41 UT Found a potential problem DELAYCAL_END.ctl, so took another two sets of data.  '''Still bad!'''
03:41 UT Found a potential problem DELAYCAL_END.ctl, so took another two sets of data.  '''Still bad!'''


04:14 UT Started another set of data.  After studying schedule.py, another problem was found.  DELAYCAL_END command has to have CIEL-2 as second value on the line, otherwise source id is set to None!
04:14 UT Started roachcal.scd for another set of data.  After studying schedule.py, another problem was found.  DELAYCAL_END command has to have CIEL-2 as second value on the line, otherwise source id is set to None! '''Yay! It finally worked!'''

Revision as of 04:25, 5 November 2016

Nov 04

19:18 UT Reboot ROACHes to clear fault light and test whether large delays are still present. They were power-cycled and reloaded.

19:24 UT Started roachcal.scd to take packet capture data for checking delays. Still bad!

Nov 05

03:41 UT Found a potential problem DELAYCAL_END.ctl, so took another two sets of data. Still bad!

04:14 UT Started roachcal.scd for another set of data. After studying schedule.py, another problem was found. DELAYCAL_END command has to have CIEL-2 as second value on the line, otherwise source id is set to None! Yay! It finally worked!