2017 December: Difference between revisions
(Created page with "[http://www.ovsa.njit.edu/wiki/index.php/Expanded_Owens_Valley_Solar_Array#Observing_Log Back to Observing Log] = Dec 13 = '''02:16 UT''' This morning (Dec. 12) the DPP was u...") |
(→Dec 13) |
||
| Line 3: | Line 3: | ||
= Dec 13 = | = Dec 13 = | ||
'''02:16 UT''' This morning (Dec. 12) the DPP was up, but showed signs of having been rebooted somehow, so recording was not working. At the same time, I found that the ROACH boards were not producing enough packets. I restarted everything, but at that point the delays were not correct. Tonight I analyzed the last calibration scan of the day, and now the delays should be okay for tomorrow. Another thing I noticed (not sure when this happened, but probably on Dec. 11) is that Ant 11 had the wrong crio.ini file, so I had to load the correct one. | '''02:16 UT''' This morning (Dec. 12) the DPP was up, but showed signs of having been rebooted somehow, so recording was not working. At the same time, I found that the ROACH boards were not producing enough packets. I restarted everything, but at that point the delays were not correct. Tonight I analyzed the last calibration scan of the day, and now the delays should be okay for tomorrow. Another thing I noticed (not sure when this happened, but probably on Dec. 11) is that Ant 11 had the wrong crio.ini file, so I had to load the correct one. | ||
'''15:21 UT''' I found ant5 had the wrong crio.ini. I loaded the correct one. I also see that the ACC is causing the glitches in the data again, so it has to be rebooted. Since I was too late before the refcal started, I will wait until 16:05 UT when we go to the Sun. | |||
Latest revision as of 15:24, 13 December 2017
Dec 13
02:16 UT This morning (Dec. 12) the DPP was up, but showed signs of having been rebooted somehow, so recording was not working. At the same time, I found that the ROACH boards were not producing enough packets. I restarted everything, but at that point the delays were not correct. Tonight I analyzed the last calibration scan of the day, and now the delays should be okay for tomorrow. Another thing I noticed (not sure when this happened, but probably on Dec. 11) is that Ant 11 had the wrong crio.ini file, so I had to load the correct one.
15:21 UT I found ant5 had the wrong crio.ini. I loaded the correct one. I also see that the ACC is causing the glitches in the data again, so it has to be rebooted. Since I was too late before the refcal started, I will wait until 16:05 UT when we go to the Sun.