Difference between revisions of "2017 July"

From EOVSA Wiki
Jump to: navigation, search
(Jul 01)
(Jul 01)
Line 7: Line 7:
 
:* one with the 27-m feed rotated by to 90-degrees (gives crossed-feed data for equatorial dishes 9-11, 13),  
 
:* one with the 27-m feed rotated by to 90-degrees (gives crossed-feed data for equatorial dishes 9-11, 13),  
 
:* one with the 27-m feed unrotated (gives parallel-feed data for equatorial dishes 9-11, 13)
 
:* one with the 27-m feed unrotated (gives parallel-feed data for equatorial dishes 9-11, 13)
 +
 +
'''04:04 UT''' The first two scans worked fine, but I could not get $PA-STOP to work (should zero the FRM PA, but instead it kept sending commands to keep the feed perpendicular, overriding my FRM-SET-PA -90 command).  I had to kill the schedule and reopen it.  Now on the third scan as of 04:03 UT.

Revision as of 04:07, 1 July 2017

Back to Observing Log

Jul 01

03:17 UT Ant 12 is back! It will no doubt have terrible delays. Meanwhile, I am redoing my earlier calibration on 3C273 with parallel and crossed feeds, but now adding parallel and crossed feeds for the equatorial dishes. A total of four scans are being taken, in this order:

  • one with the 27-m feed tracking parallactic angle (gives parallel-feed data for azel dishes 1-8, 12),
  • one with the 27-m feed tracking parallactic angle + 90 degrees (gives crossed-feed data for azel dishes 1-8, 12),
  • one with the 27-m feed rotated by to 90-degrees (gives crossed-feed data for equatorial dishes 9-11, 13),
  • one with the 27-m feed unrotated (gives parallel-feed data for equatorial dishes 9-11, 13)

04:04 UT The first two scans worked fine, but I could not get $PA-STOP to work (should zero the FRM PA, but instead it kept sending commands to keep the feed perpendicular, overriding my FRM-SET-PA -90 command). I had to kill the schedule and reopen it. Now on the third scan as of 04:03 UT.