# Difference between revisions of "Antenna Position"

m (Fixed some equation spacing, and equation numbers) |
(→Baselines and Spatial Frequencies) |
||

Line 53: | Line 53: | ||

This vector difference in positions can point in any direction in space, but the part of the baseline that matters in calculating ''u,v,w'' is the component perpendicular to the direction <math>\theta _o</math> (the phase center direction), which we called <math>B_{proj}</math> in '''Figure 2'''. Let us express the phase center direction as a unit vector '''<math>\vec{s_o}</math>''' <math>= (h_o, \delta_o)</math>, where <math>h_o</math> is the hour angle (relative to the local meridian) and <math>\delta_o</math> is the declination (relative to the celestial equator). Then <math>B_{proj} = \vec{B} \cdot \vec{s_o}= B \cos \theta _o</math>. | This vector difference in positions can point in any direction in space, but the part of the baseline that matters in calculating ''u,v,w'' is the component perpendicular to the direction <math>\theta _o</math> (the phase center direction), which we called <math>B_{proj}</math> in '''Figure 2'''. Let us express the phase center direction as a unit vector '''<math>\vec{s_o}</math>''' <math>= (h_o, \delta_o)</math>, where <math>h_o</math> is the hour angle (relative to the local meridian) and <math>\delta_o</math> is the declination (relative to the celestial equator). Then <math>B_{proj} = \vec{B} \cdot \vec{s_o}= B \cos \theta _o</math>. | ||

− | Recall that the spatial frequencies ''u,v,w'' are just the distances expressed in wavelength units, so we can get the ''u,v,w'' coordinates from the baseline length expressed in wavelength units from the following coordinate transformation: | + | Recall that the spatial frequencies ''u,v,w'' are just the distances expressed in wavelength units, so we can get the ''u,v,w'' coordinates from the baseline length expressed in wavelength units from the following coordinate transformation ([http://adsabs.harvard.edu/abs/1999ASPC..180...11T see Thompson 1999 for details]): |

− | + | ||

<center><math> | <center><math> | ||

Line 74: | Line 73: | ||

\end{bmatrix} | \end{bmatrix} | ||

</math> <math>(1)</math> </center> | </math> <math>(1)</math> </center> | ||

− | |||

=== How baseline errors can contribute to the error in phase === | === How baseline errors can contribute to the error in phase === |

## Revision as of 15:13, 7 November 2016

## Contents

## Obtaining *u,v,w* From An Antenna Array

A synthesis imaging radio instrument consists of a number of radio elements (radio dishes, dipoles, or other collectors of radio emission), which represent measurement points in *u,v,w* space. We need to describe how to convert an array of dishes on the ground to a set of points in *u,v,w* space.

*E, N, U* coordinates to *x, y, z*

The first step is to determine a consistent coordinate system. Antennas are typically measured in units such as meters along the ground. We will use a right-handed coordinate system of * East*,

*, and*

**North**

**Up***. These coordinates are relative to the local horizon, however, and will change depending on where we are on the spherical Earth. It is convenient in astronomy to use a coordinate system aligned with the Earth's rotational axis, for which we will use coordinates*

**(E, N, U)***as shown in*

**(x, y, z)****Figure 1**. Conversion from

*(E, N, U)*to

*(x, y, z)*is done via a simple rotation matrix:

which yields the relations:

### Baselines and Spatial Frequencies

Note that the baselines are differences of coordinates, i.e. for the baseline between two antennas we have a vector:

This vector difference in positions can point in any direction in space, but the part of the baseline that matters in calculating *u,v,w* is the component perpendicular to the direction (the phase center direction), which we called in **Figure 2**. Let us express the phase center direction as a unit vector , where is the hour angle (relative to the local meridian) and is the declination (relative to the celestial equator). Then .

Recall that the spatial frequencies *u,v,w* are just the distances expressed in wavelength units, so we can get the *u,v,w* coordinates from the baseline length expressed in wavelength units from the following coordinate transformation (see Thompson 1999 for details):

### How baseline errors can contribute to the error in phase

The geometric phase difference at the phase center ( term in (1)) is:

where , geometric delay. We can see what can affect the geometric phase by taking the differential of this expression:

where we have used the relation between right ascension and hour angle: , so . Equation (2) shows how baseline errors and source position errors (, ) will affect the error in group delay (or yield an error in phase ). Note that a clock error is equivalent to a source position error .

If we have a source whose position is known, we can use Equation (2) to find the location of the antennas (this is called * baseline determination*). The error in antenna position is largely independent of the baseline lengths. For example, say that we can measure to within 1 degree at 5 GHz ( = 6 cm). Then we can measure , and to a precision of order (1 / 360) 6 cm ~ 1 / 60 cm even though = 5000 km or more (VLBI).

The time of day and location of the antennas must be known to relatively high accuracy -- needed for determining the geometric delay. A clock error of 1 s, or a baseline error of a few cm, will cause a serious phase shift of the source over, say, 10 minutes. At OVRO, using a GPS clock and measuring baselines with cosmic source calibration, we get a time accuracy of << 1 ms, and baseline errors of about 3 mm. Therefore, these effects are not serious over a short time interval, but may still be problematic over 8 hours. This is one reason that we do phase calibration observations every ~ 2 hours.