Full Disk Simulations: Difference between revisions

From EOVSA Wiki
Jump to navigation Jump to search
No edit summary
Line 6: Line 6:
'''NB: Since we are just getting started with this procedure, this page will initially present a number of tests.  Ultimately it should become a definitive description of the procedure without a lot of false starts.'''
'''NB: Since we are just getting started with this procedure, this page will initially present a number of tests.  Ultimately it should become a definitive description of the procedure without a lot of false starts.'''


= Creating Disk Models =
= Creating Disk Models in CASA =

Revision as of 16:54, 28 August 2019

Purpose

EOVSA's 13 antennas provide limited uv coverage for imaging the solar disk, but the baselines do contain considerable flux, especially on shorter baselines. We have good evidence that weak features of the quiet Sun (e.g. filament channels, prominences, and weak plage areas) do show up in the data, but the variations in brightness due to the poorly sampled disk often swamp them. The correct approach to imaging such features is to model the quiet solar disk and remove it from the uv data. then clean the residual flux that contains these weaker features, and finally add the disk model back. Self calibration also requires a good source model that includes the disk.

The purpose of this page is to describe the nuts and bolts of that procedure and document the performance.

NB: Since we are just getting started with this procedure, this page will initially present a number of tests. Ultimately it should become a definitive description of the procedure without a lot of false starts.

Creating Disk Models in CASA