Difference between revisions of "System Gain Calibration"

From EOVSA Wiki
Jump to: navigation, search
m (Gain Control "Knobs" table made larger so it can be read directly)
Line 1: Line 1:
 
== Gain Control "Knobs" ==
 
== Gain Control "Knobs" ==
[[File:Eovsa_gain_controls.png|thumb|400px|EOVSA Gain Control "Knobs"]] Non-solar radio interferometers can make the assumption that the system noise is dominated by the relatively uniform sky, but this is not at all valid for the Sun--the Sun dominates the system noise, and can be highly variable, especially during flares and other radio outbursts.  This is a main reason why it is necessary to design solar-dedicated instruments for observing the Sun.  In order to cope with the high and variable noise from the Sun, EOVSA is equipped with a series of attenuators, two RF attenuators in the frontend, and an IF attenuator in the analog downconverter.  In addition, it is possible to change the gain via parameters (ADC Attenuation, FFT Shift, and Equalizer Coefficients) in the digital correlator.  The table above lists the various gain control points, their purpose, and other relevant information.
+
[[File:Eovsa_gain_controls.png|thumb|600px|EOVSA Gain Control "Knobs"]] Non-solar radio interferometers can make the assumption that the system noise is dominated by the relatively uniform sky, but this is not at all valid for the Sun--the Sun dominates the system noise, and can be highly variable, especially during flares and other radio outbursts.  This is a main reason why it is necessary to design solar-dedicated instruments for observing the Sun.  In order to cope with the high and variable noise from the Sun, EOVSA is equipped with a series of attenuators, two RF attenuators in the frontend, and an IF attenuator in the analog downconverter.  In addition, it is possible to change the gain via parameters (ADC Attenuation, FFT Shift, and Equalizer Coefficients) in the digital correlator.  The table above lists the various gain control points, their purpose, and other relevant information.
  
 
== Gain Calibration Procedure ==
 
== Gain Calibration Procedure ==

Revision as of 20:22, 18 September 2016

Gain Control "Knobs"

EOVSA Gain Control "Knobs"
Non-solar radio interferometers can make the assumption that the system noise is dominated by the relatively uniform sky, but this is not at all valid for the Sun--the Sun dominates the system noise, and can be highly variable, especially during flares and other radio outbursts. This is a main reason why it is necessary to design solar-dedicated instruments for observing the Sun. In order to cope with the high and variable noise from the Sun, EOVSA is equipped with a series of attenuators, two RF attenuators in the frontend, and an IF attenuator in the analog downconverter. In addition, it is possible to change the gain via parameters (ADC Attenuation, FFT Shift, and Equalizer Coefficients) in the digital correlator. The table above lists the various gain control points, their purpose, and other relevant information.

Gain Calibration Procedure