Mapping Software - Revision history

Dgary: /* Philosophy */

2020-06-10T02:04:51Z

Philosophy

← Older revision		Revision as of 02:04, 10 June 2020
Line 4:		Line 4:

	==Philosophy==		==Philosophy==
	Although the Sunpy Python package already exists for doing analysis of solar data, it has a significant learning curve and lacks the generality of the Mapping routines written by Dominic Zarro for the IDL-based Solarsoft (SSW). Perhaps having the IDL Mapping routines available in Python may help those IDL users who have been avoiding learning Python. The mapping routines work equally well in both Python 2.7 and Python 3.		Although the Sunpy Python package already exists for doing analysis of solar data, it has a significant learning curve and lacks the generality of the Mapping routines written by Dominic Zarro for the IDL-based Solarsoft (SSW). Perhaps having the IDL Mapping routines available in Python may help those IDL users who have been avoiding learning Python. The mapping routines '''work equally well in both Python 2.7 and Python 3'''.

	==Similarities and Differences==		==Similarities and Differences==

Dgary: /* Philosophy */

2020-06-10T02:04:31Z

Philosophy

← Older revision		Revision as of 02:04, 10 June 2020
Line 4:		Line 4:

	==Philosophy==		==Philosophy==
	Although ~~there is already~~ the Sunpy Python package for doing analysis of solar data, it has a significant learning curve and lacks the generality of the Mapping routines written by Dominic Zarro for the IDL-based Solarsoft (SSW). Perhaps having the IDL Mapping routines available in Python may help those who have been avoiding learning Python. The mapping routines work equally well in both Python 2.7 and Python 3.		Although the Sunpy Python package already exists for doing analysis of solar data, it has a significant learning curve and lacks the generality of the Mapping routines written by Dominic Zarro for the IDL-based Solarsoft (SSW). Perhaps having the IDL Mapping routines available in Python may help those IDL users who have been avoiding learning Python. The mapping routines work equally well in both Python 2.7 and Python 3.

	==Similarities and Differences==		==Similarities and Differences==

Dgary: /* Port of IDL Mapping routines (by Dominic Zarro) to Python */

2020-06-10T02:03:32Z

Port of IDL Mapping routines (by Dominic Zarro) to Python

← Older revision		Revision as of 02:03, 10 June 2020
Line 1:		Line 1:
	=Port of IDL Mapping routines (by Dominic Zarro) to Python=		=Port of IDL Mapping routines (by Dominic Zarro) to Python=
			==Getting the Software==
			Simply go to [https://github.com/dgary50/mapping this github repository] to download the software.

	==Philosophy==		==Philosophy==
	Although there is already the Sunpy Python package for doing analysis of solar data, it has a significant learning curve and lacks the generality of the Mapping routines written by Dominic Zarro for the IDL-based Solarsoft (SSW). Perhaps having the IDL Mapping routines available in Python may help those who have been avoiding learning Python. The mapping routines work equally well in both Python 2.7 and Python 3.		Although there is already the Sunpy Python package for doing analysis of solar data, it has a significant learning curve and lacks the generality of the Mapping routines written by Dominic Zarro for the IDL-based Solarsoft (SSW). Perhaps having the IDL Mapping routines available in Python may help those who have been avoiding learning Python. The mapping routines work equally well in both Python 2.7 and Python 3.

Dgary: /* Python form of the same command: */

2020-06-10T01:53:42Z

Python form of the same command:

← Older revision		Revision as of 01:53, 10 June 2020
Line 30:		Line 30:
	In the above, the action of the /limb switch in IDL is accomplished by setting limb=True.		In the above, the action of the /limb switch in IDL is accomplished by setting limb=True.

	Please see ['http://www.ovsa.njit.edu/mapping/mapping_test.html] for further examples.		Please see [http://www.ovsa.njit.edu/mapping/mapping_test.html this link] for further examples.

Dgary: /* Python form of the same command: */

2020-06-10T01:51:37Z

Python form of the same command:

← Older revision		Revision as of 01:51, 10 June 2020
Line 30:		Line 30:
	In the above, the action of the /limb switch in IDL is accomplished by setting limb=True.		In the above, the action of the /limb switch in IDL is accomplished by setting limb=True.

	Please see ~~this link~~ for further examples.		Please see ['http://www.ovsa.njit.edu/mapping/mapping_test.html] for further examples.

Dgary: /* Philosophy */

2020-06-10T01:48:07Z

Philosophy

← Older revision		Revision as of 01:48, 10 June 2020
Line 1:		Line 1:
	=Port of IDL Mapping routines (by Dominic Zarro) to Python=		=Port of IDL Mapping routines (by Dominic Zarro) to Python=
	==Philosophy==		==Philosophy==
	Although there is already the Sunpy Python package for doing analysis of solar data, it has a significant learning curve and lacks the generality of the Mapping routines written by Dominic Zarro for the IDL-based Solarsoft (SSW). Perhaps having the IDL Mapping routines available in Python may help those who have been avoiding learning Python. To the extent possible, the routine names and general approach of the IDL routines have been kept, so that those familiar with the IDL routines will find it familiar and easy to use. The routines for multi-panel plots, overlaying the solar grid, contour plots, map sub-regions, rotations, translations, and differential solar rotation are all available. Importantly, the plotting system works similar to IDL direct graphics behavior as follows:		Although there is already the Sunpy Python package for doing analysis of solar data, it has a significant learning curve and lacks the generality of the Mapping routines written by Dominic Zarro for the IDL-based Solarsoft (SSW). Perhaps having the IDL Mapping routines available in Python may help those who have been avoiding learning Python. The mapping routines work equally well in both Python 2.7 and Python 3.

			==Similarities and Differences==
			To the extent possible, the routine names and general approach of the IDL routines have been kept, so that those familiar with the IDL routines will find it familiar and easy to use. The routines for multi-panel plots, overlaying the solar grid, contour plots, map sub-regions, rotations, translations, and differential solar rotation are all available. Importantly, the plotting system works similar to IDL direct graphics behavior as follows:
	* Issuing multiple plot calls will use the same window.		* Issuing multiple plot calls will use the same window.
	* For multi-panel plots, each new plot call will advance to the next panel, but after the last panel has been used the next plot call will reuse the first panel.		* For multi-panel plots, each new plot call will advance to the next panel, but after the last panel has been used the next plot call will reuse the first panel.
Line 10:		Line 13:

	Some differences could not be eliminated, however. Unlike IDL, Python does not have a procedure syntax, switch parameters, nor can it return output in parameters to a call. Therefore, everything is a function, and when multiple results are to be returned they are returned as either tuples or in dictionaries. Here are a couple of examples to illustrate:		Some differences could not be eliminated, however. Unlike IDL, Python does not have a procedure syntax, switch parameters, nor can it return output in parameters to a call. Therefore, everything is a function, and when multiple results are to be returned they are returned as either tuples or in dictionaries. Here are a couple of examples to illustrate:

			===IDL fits2map syntax example:===
			fits2map,'aia304.fits',aiamap,header=h

			===Python form of the same command:===
			aiamap, h = fits2map('aia304.fits',header=True)

			In the above, if header is not set to True, fits2map returns only aiamap, while if header is True then fits2map returns a tuple of items--the map and the header.

	===IDL plot_map syntax example:===		===IDL plot_map syntax example:===
Line 16:		Line 27:
	===Python form of the same command:===		===Python form of the same command:===
	plot_map(aiamap, grid=10, limb=True, center=[-400,400], fov=[3,3])		plot_map(aiamap, grid=10, limb=True, center=[-400,400], fov=[3,3])

			In the above, the action of the /limb switch in IDL is accomplished by setting limb=True.

			Please see this link for further examples.

Dgary: Created page with "=Port of IDL Mapping routines (by Dominic Zarro) to Python= ==Philosophy== Although there is already the Sunpy Python package for doing analysis of solar data, it has a signif..."

2020-06-10T01:29:25Z

Created page with "=Port of IDL Mapping routines (by Dominic Zarro) to Python= ==Philosophy== Although there is already the Sunpy Python package for doing analysis of solar data, it has a signif..."

New page

=Port of IDL Mapping routines (by Dominic Zarro) to Python=
==Philosophy==
Although there is already the Sunpy Python package for doing analysis of solar data, it has a significant learning curve and lacks the generality of the Mapping routines written by Dominic Zarro for the IDL-based Solarsoft (SSW). Perhaps having the IDL Mapping routines available in Python may help those who have been avoiding learning Python. To the extent possible, the routine names and general approach of the IDL routines have been kept, so that those familiar with the IDL routines will find it familiar and easy to use. The routines for multi-panel plots, overlaying the solar grid, contour plots, map sub-regions, rotations, translations, and differential solar rotation are all available. Importantly, the plotting system works similar to IDL direct graphics behavior as follows:
* Issuing multiple plot calls will use the same window.
* For multi-panel plots, each new plot call will advance to the next panel, but after the last panel has been used the next plot call will reuse the first panel.
* To plot to a new window, simply specify a window number. If that window does not exist, it will be created. If it does exist it will be reused.
* Once a window is plotted to, subsequent plots will go to that window if no window is specified.
* Contour overlays automatically go to the last-used window/panel.
However, unlike IDL direct graphics, once a plot is created one can zoom, pan, print in multiple formats, etc.

Some differences could not be eliminated, however. Unlike IDL, Python does not have a procedure syntax, switch parameters, nor can it return output in parameters to a call. Therefore, everything is a function, and when multiple results are to be returned they are returned as either tuples or in dictionaries. Here are a couple of examples to illustrate:

===IDL plot_map syntax example:===
plot_map,aiamap,grid=10,/limb,center=[-400,400],fov=[3,3]

===Python form of the same command:===
plot_map(aiamap, grid=10, limb=True, center=[-400,400], fov=[3,3])