Spectral Imaging with SunCASA - Revision history

Sjyu: /* Get Dynamic Spectrum with SunCASA */

2019-05-09T19:34:32Z

Get Dynamic Spectrum with SunCASA

← Older revision		Revision as of 19:34, 9 May 2019
Line 2:		Line 2:

	==Get Dynamic Spectrum with SunCASA==		==Get Dynamic Spectrum with SunCASA==
	Within SunCASA, you are using IPython to interact with the system. This does not mean extensive python experience is necessary. Basic Python interactions are straightforward, e.g., assigning parameters, importing modules, running functions. The first module we introduce is ''dspec''. This module allows you to generate and visualize a dynamic spectrum out of a MS file or a subset of it, with a combination of selections parameters: spw, timerange,freqrange, bl, ~~timerange,~~pol		Within SunCASA, you are using IPython to interact with the system. This does not mean extensive python experience is necessary. Basic Python interactions are straightforward, e.g., assigning parameters, importing modules, running functions. The first module we introduce is ''dspec''. This module allows you to generate and visualize a dynamic spectrum out of a MS file or a subset of it, with a combination of selections parameters: ''spw'', ''timerange'', ''freqrange'', ''bl'', ''pol''

	<pre>		<pre>

Sjyu: /* Get Dynamic Spectrum with SunCASA */

2019-05-09T19:32:38Z

Get Dynamic Spectrum with SunCASA

← Older revision		Revision as of 19:32, 9 May 2019
Line 2:		Line 2:

	==Get Dynamic Spectrum with SunCASA==		==Get Dynamic Spectrum with SunCASA==
	Within SunCASA, you are using IPython to interact with the system. This does not mean extensive python experience is necessary. Basic Python interactions are straightforward, e.g., assigning parameters, importing modules, running functions. The first module we introduce is ''dspec''. This module allows you to generate and visualize a dynamic spectrum ~~from an~~ MS file.		Within SunCASA, you are using IPython to interact with the system. This does not mean extensive python experience is necessary. Basic Python interactions are straightforward, e.g., assigning parameters, importing modules, running functions. The first module we introduce is ''dspec''. This module allows you to generate and visualize a dynamic spectrum out of a MS file or a subset of it, with a combination of selections parameters: spw, timerange,freqrange, bl, timerange,pol

	<pre>		<pre>

Sjyu at 19:03, 9 May 2019

2019-05-09T19:03:44Z

← Older revision		Revision as of 19:03, 9 May 2019
Line 1:		Line 1:
	~~==Before Starting SunCASA==~~
	You will likely be running SunCASA from a working directory that has your data on it, or where you want your output to go. It is easier to start from there than changing directory inside SunCASA. '''Warning''': SunCASA does not like a directory that contains spaces in its path. If you have done the installation as instructed above, then there should be an executable script called ''suncasa'' in your system path. This script will set up the required environment and run the version of SunCASA that it points to.

	~~You can open up a terminal, cd to your working directory and typing~~
	~~<pre>~~
	~~suncasa~~
	~~</pre>~~
	EOVSA data is handled in [https://casa.nrao.edu CASA] tables system, known as a Measurement Set (MS). The actual visibility data are stored in a MAIN table that contains a number of rows, each of which is effectively a single timestamp for a single spectral window and a single baseline. Within SunCASA, you will have access to a collection of tools that allow you to explore and utilize the new radio dynamic spectroscopic imaging data from EOVSA.

	==Get Dynamic Spectrum with SunCASA==		==Get Dynamic Spectrum with SunCASA==

Sjyu: Created page with "==Before Starting SunCASA== You will likely be running SunCASA from a working directory that has your data on it, or where you want your output to go. It is easier to start fr..."

2019-05-09T19:02:31Z

Created page with "==Before Starting SunCASA== You will likely be running SunCASA from a working directory that has your data on it, or where you want your output to go. It is easier to start fr..."

New page

==Before Starting SunCASA==
You will likely be running SunCASA from a working directory that has your data on it, or where you want your output to go. It is easier to start from there than changing directory inside SunCASA. '''Warning''': SunCASA does not like a directory that contains spaces in its path. If you have done the installation as instructed above, then there should be an executable script called ''suncasa'' in your system path. This script will set up the required environment and run the version of SunCASA that it points to.

You can open up a terminal, cd to your working directory and typing
<pre>
suncasa
</pre>
EOVSA data is handled in [https://casa.nrao.edu CASA] tables system, known as a Measurement Set (MS). The actual visibility data are stored in a MAIN table that contains a number of rows, each of which is effectively a single timestamp for a single spectral window and a single baseline. Within SunCASA, you will have access to a collection of tools that allow you to explore and utilize the new radio dynamic spectroscopic imaging data from EOVSA.

==Get Dynamic Spectrum with SunCASA==
Within SunCASA, you are using IPython to interact with the system. This does not mean extensive python experience is necessary. Basic Python interactions are straightforward, e.g., assigning parameters, importing modules, running functions. The first module we introduce is ''dspec''. This module allows you to generate and visualize a dynamic spectrum from an MS file.

<pre>
from suncasa.utils import dspec
vis = 'example.ms' # the visbility data
bl='4&12' ## specify a baseline between antenna 4 and antenna 12.
spw='0~7'
specfile = msfile+'.bl4-12.190000-194000.spec.npz'
timeran='17:58:50~17:59:30'
dspec.plt_dspec(specfile=specfile,pol='RR',dmin=1,dmax=12) #dmin and dmax is used to change color,pol can be selected as 'RR''LL'or'I'
</pre>

==Imaging with SunCASA ==