Reference Gain Calibration
Procedure for Analysis
Reference complex gain calibration refers to determining the "system" amplitude and phase with high precision as a function of IF band (i.e. integrated over each 500 MHz IF band). A typical reference calibration would cover 34 bands, 2 polarizations, and 13 antennas. The routines (on pipeline machine) to retrieve and analyze the data are in the module refcal_anal.py. Start from a time range during which the reference calibration observation occurred (check the phasecal results to see which 1-hr scan had stable phases)
import refcal_anal as ra from util import Time #example time range of the refcal scan that took place BEFORE the observation trange=Time(['2017-04-08T14:00','2017-04-08T15:00'])
Now read the data from that timerange
out=ra.rd_refcal(trange)
Note that there are optional arguments that can be given, such as projid='PHASECAL' (the default) and srcid='1229+060', but these are generally not needed.
To correct for differential feed rotation (for refcal data after 05:00 UT on 2017-Jul-01), you can use:
out_corr = ra.unrot_refcal(out)
Take a look at the phases (averaged over each band):
ra.graph(out_corr)
By default it displays only bands 5, 11, 17, 23 and polarization XX. To change the bands and polarization to display, use the "bandplt" and 'pol' parameters (better to check more bands).
ra.graph(out_corr, bandplt=[5,13,19,25], pol=1)
Observations within this time range will be used for averaging to get the reference phases/amplitudes. Data will be flagged if the SNR is less than minsnr, which can be supplied. The default minsnr is set to 1.0. We can further determine a finer selection of time range within this scan that has clean and stable phases if needed, by setting the new timerange in "trange" below.
refcal=ra.refcal_anal(out_corr,timerange=trange,scanidx=[0])
It will generate four plots. First and second are phases and amplitudes of the data similar as those produced by ra.graph(), but with the selected time range for averaging highlighted (one can use "bandplt" and "pol" to choose bands and polarization to display as well). The 3rd plot is the averaged phase vs. frequency and the 4th is the averaged amplitude vs. frequency. Those data will be our "analyzed" reference calibration data saved in the returned dictionary (named "refcal" here). The dictionary contains the actual complex values (refcal['refcal']), a flag array with the same shape (refcal['flag']), and some timestamps, e.g., refcal['t_mid'] is the middle of the time range used for averaging. Both refcal['refcal'] and refcal['flag'] have a shape of (15, 2, 34) -- which corresponds to # of antennas, # of polarizations, and # of bands.
If you determine some antenna, band, polarization need to be flagged/unflagged, they have to be manually changed in the returned refcal['flag'] array. In this example, Antenna 12 was not tracking, and the algorithm did not pick up all of them, so we have to do this manually -- setting refcal['flag'][11, :, :]=1
refcal['flag'][11]=1
If satisfied with the results (by looking at the plots), we can go ahead and send them to the SQL database
import cal_header as ch ch.refcal2sql(refcal)
To retrieve the refcal data back from SQL database based on, e.g., a solar data one wish to calibrate. We can provide a time:
t=Time('2017-04-07T19:40') refcal=ra.sql2refcal(t)
The resulted refcal have three keys: 'amp' (15 x 2 x 34 array), 'pha' (15 x 2 x 34 array), and 'timestamp' (in jd). The refcal data found will be the closest one PRIOR to the supplied observation time.
Updating the Reference Calibrations Table
The table below lists the known good reference calibrations. To facilitate adding entries to this table, do the following, where the time is after the desired refcal, but before any later refcal:
t=Time('2017-06-23T19:40') # retrieves the refcal at 13:07 UT on that day refcal=ra.sql2refcal(t) ra.graph_results(refcal, savefigs=True)
This will create summary plots of the amplitude and phase, will write the two corresponding *.png files into the /common/webplots/refcal folder, and will print as a text string the lines needed to add an entry. Just cut from the terminal and paste into the wiki editor at the appropriate place to preserve time order.
Getting Band 4 Phase (2017-Dec-24)
Because the refcals have up to now been done with the high-frequency receiver (HiRX) on Antenna 14, we are only measuring the reference phase on bands 5-34, even though band 4 has been present in the solar data. However, the shape of the phase vs. frequency is very regular, suggesting that if we know this shape (which could change over time, so it should be measured on a regular basis) we can predict the Band 4 phase based on the phases of the higher bands.
To do this, we measure the phase differences between the low-frequency receiver (LoRX) and HiRx for those frequencies that are in common. It happens that there are many frequencies in common, since the LoRX covers 1-6 GHz and the HiRX covers 3-18 GHz. In fact, the pcal_lo_all.fsq frequency sequence measures bands 1-12 (1-7 GHz) and the phases seem to be coherent from 6-7 GHz. This provides 38 frequencies in common between LoRX and HiRX, from which to determine the phase differences.
The procedure, then, is to measure the LoRX and HiRX phases near the meridian passage of a strong calibrator (so that all of the feeds are approximately parallel and no feed-rotation-correction is needed). We first observe the source with the LoRX receiver using pcal_lo_all.fsq, and then observe the source with the HiRX receiver using pcal_hi_all.fsq. Here is an example of obtaining the phases of such observations and plotting the phase differences, with corresponding parabolic fits:
npzfiles = ['/common/webplots/phasecal/20171224131548_1229+020.npz','/common/webplots/phasecal/20171224135049_1229+020.npz'] import read_idb as ri import numpy as np import matplotlib.pylab as plt outlo = ri.read_npz([npzfiles[0]]) outhi = ri.read_npz([npzfiles[1]]) phlo = np.angle(np.sum(outlo['x'][ri.bl2ord[13,0:13]],3)) phhi = np.angle(np.sum(outhi['x'][ri.bl2ord[13,0:13]],3)) from util import common_val_idx, lobe idx1,idx2 = common_val_idx(outlo['fghz'],outhi['fghz']) pdif = np.unwrap(lobe(phlo[:,:,idx1] - phhi[:,:,idx2])) fcom = outlo['fghz'][idx1] ps = [] f, ax = plt.subplots(2,13) for i in range(13): for j in range(2): ax[j,i].cla() ax[j,i].plot(fcom,pdif[i,j],'.') ax[j,i].set_ylim(-1,11) ps.append(np.polyfit(fcom,pdif[i,j],2)) ax[j,i].plot(fcom,np.polyval(ps[-1],fcom),'-')
The resulting plot is shown in the figure at right. The phase differences can be extrapolated to the band4 phases by
for p in array(ps)[::2]: print ('{:8.2f}'*8).format(*polyval(p,outlo['fghz'][23:31]))
for p in array(ps)[1::2]: print ('{:8.2f}'*8).format(*polyval(p,outlo['fghz'][23:31]))
which results in the following tables (I put the headings in by hand):
XX Phase Differences for Band 4 2.87 2.89 2.90 2.92 2.94 2.96 2.97 3.00 ------ ------ ------ ------ ------ ------ ------ ------ 1 -0.596 -0.562 -0.528 -0.494 -0.460 -0.426 -0.392 -0.358 2 -0.574 -0.541 -0.508 -0.475 -0.442 -0.408 -0.375 -0.341 3 -0.567 -0.535 -0.502 -0.469 -0.436 -0.403 -0.370 -0.337 4 -0.617 -0.583 -0.549 -0.514 -0.479 -0.444 -0.409 -0.374 5 -0.664 -0.629 -0.594 -0.559 -0.523 -0.488 -0.452 -0.416 6 -0.653 -0.619 -0.584 -0.549 -0.514 -0.479 -0.444 -0.409 7 -0.593 -0.558 -0.524 -0.489 -0.454 -0.419 -0.384 -0.349 8 -0.565 -0.532 -0.499 -0.466 -0.433 -0.399 -0.366 -0.332 9 -0.720 -0.686 -0.651 -0.617 -0.582 -0.548 -0.513 -0.478 10 -0.542 -0.510 -0.478 -0.446 -0.413 -0.381 -0.348 -0.315 11 -0.660 -0.626 -0.591 -0.557 -0.522 -0.487 -0.452 -0.417 12 -0.521 -0.490 -0.460 -0.429 -0.397 -0.366 -0.335 -0.303 13 -0.793 -0.753 -0.714 -0.674 -0.634 -0.595 -0.555 -0.515
YY Phase Differences for Band 4 2.87 2.89 2.90 2.92 2.94 2.96 2.97 3.00 ------ ------ ------ ------ ------ ------ ------ ------ 1 -1.016 -0.980 -0.944 -0.909 -0.873 -0.837 -0.801 -0.765 2 -0.988 -0.952 -0.916 -0.880 -0.844 -0.808 -0.772 -0.736 3 -1.012 -0.977 -0.942 -0.906 -0.871 -0.836 -0.800 -0.765 4 -1.008 -0.973 -0.939 -0.904 -0.869 -0.834 -0.799 -0.764 5 -1.065 -1.027 -0.990 -0.953 -0.916 -0.878 -0.841 -0.803 6 -0.924 -0.890 -0.856 -0.823 -0.789 -0.755 -0.721 -0.687 7 -0.584 -0.561 -0.538 -0.515 -0.492 -0.468 -0.444 -0.420 8 -1.038 -1.003 -0.967 -0.931 -0.895 -0.859 -0.823 -0.787 9 -1.079 -1.045 -1.010 -0.975 -0.939 -0.904 -0.869 -0.834 10 -1.155 -1.117 -1.079 -1.041 -1.003 -0.964 -0.926 -0.888 11 -1.046 -1.010 -0.975 -0.939 -0.903 -0.867 -0.831 -0.795 12 -0.781 -0.750 -0.719 -0.688 -0.657 -0.625 -0.594 -0.562 13 -1.163 -1.123 -1.082 -1.042 -1.001 -0.960 -0.919 -0.879
List of Analyzed Reference Calibrations
Date | Timestamp | Source | Obs Trange | Scan Idx | Avg Trange | Bands | Phase Plot | Amp Plot | Comments |
2017/04/02 | 06:36:50 | 3c273 | 04:20~11:00 | All | 05:47~07:26 | 5, 7, 9, 11, 13, 15, 17, 19, 21, 23 | Phase | Amp | Ant 12 was not tracking. Delay center change at 11:38:17. |
2017/04/04 | 09:32:50 | 3c273 | 04:43~10:57 | All | 08:46~10:19 | 5, 7, 9, 11, 13, 15, 17, 19, 21, 23 | Phase | Amp | Ant 12 was not tracking. Delay center change at 16:43:51. |
2017/04/05 | 06:44:10 | 3c273 | 04:17~10:30 | All | 04:27~09:34 | 5, 7, 9, 11, 13, 15, 17, 19, 21, 23 | Phase | Amp | Ant 12 was not tracking. |
2017/04/06 | 09:54:50 | 3c273 | 04:14~10:49 | All | 05:39~08:11 | 5, 7, 9, 11, 13, 15, 17, 19, 21, 23 | Phase | Amp | Ant 12 was not tracking. |
2017/04/07 | 08:30:51 | 3c273 | 04:00~10:30 | 1, 3, 5, 7, 9, 11, 13, 15, 17 | 07:53~09:10 | 5~34 | Phase | Amp | Ant 12 was not tracking. |
2017/04/08 | 06:14:51 | 3c273 | 05:00~10:30 | 1, 3, 5, 7, 9, 11, 13 | 05:00~07:00 | 5~34 | Phase | Amp | Ant 12 was not tracking. Ant 13 not working. Delay center change at 2017-04-08T03:12:26. Another refcal record is added at 2017-04-09T06:14:45. |
2017/04/10 | 06:57:10 | 3c273 | 04:30~10:30 | 2, 6, 8 | 5~34 | Phase | Amp | Ant 12 was not tracking. Delay center change at 2017-04-08 13:20:39. | |
2017/04/13 | 13:48:39 | 2136+006 | 0 | 5~23 | Phase | Amp | |||
2017/04/16 | 06:36:48 | 3c273 | 03:00~11:00 | 05:55~07:20 | 5~34 | Phase | Amp | Ant 12 was not tracking. | |
2017/04/17 | 06:41:51 | 3c273 | 03:29~10:07 | All | 05:55~07:29 | 5~34 | Phase | Amp | Ant 12 was not tracking. Delay center change at 19:12:58. |
2017/04/26 | 08:06:52 | 3c273 | 02:50~09:28 | All | 07:21~08:57 | 5~34 | Phase | Amp | Ant 12 was not tracking. Delay center change at 04:37:28 and 11:51:26. |
2017/06/11 | 12:56:22 | 2253+161 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 12 | ||
2017/06/14 | 02:33:19 | 1229+020 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 8 Ant 12 | ||
2017/06/14 | 13:01:19 | 2253+161 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 12 | ||
2017/06/15 | 13:05:48 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 12 | |||
2017/06/16 | 13:05:48 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 12 | |||
2017/06/20 | 13:06:26 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 1 Ant 12 | |||
2017/06/21 | 13:06:38 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 12 | |||
2017/06/22 | 13:06:53 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 12 | |||
2017/06/23 | 13:07:09 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 12 | |||
2017/06/24 | 02:25:49 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 12 | |||
2017/06/24 | 13:07:25 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 12 | |||
2017/06/25 | 13:07:43 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 10 Ant 12 | |||
2017/06/26 | 13:15:47 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 10 Ant 12 | |||
2017/06/27 | 13:02:49 | 2253+161 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 12 | ||
2017/06/30 | 02:47:50 | 1229+020 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 12 | ||
2017/07/01 | 02:44:49 | 1229+020 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 12 | ||
2017/07/02 | 03:01:20 | 1229+020 | 0 | 5~34 | Phase | Amp | |||
2017/07/03 | 02:47:49 | 1229+020 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 10 | ||
2017/07/04 | 02:47:49 | 1229+020 | 0 | 5~34 | Phase | Amp | |||
2017/07/05 | 02:55:19 | 1229+020 | 0 | 5~34 | Phase | Amp | |||
2017/07/06 | 02:47:49 | 1229+020 | 0 | 5~34 | Phase | Amp | |||
2017/07/07 | 13:12:49 | 2253+161 | 0 | 5~34 | Phase | Amp | |||
2017/07/09 | 02:35:49 | 1229+020 | 0 | 5~34 | Phase | Amp | |||
2017/07/09 | 13:16:49 | 2253+161 | 0 | 5~34 | Phase | Amp | |||
2017/07/10 | 13:14:17 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/07/11 | 13:14:18 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/07/12 | 13:14:24 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/07/13 | 13:14:59 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/07/14 | 13:15:35 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/07/16 | 02:48:33 | 1229+020 | 0 | 5~34 | Phase | Amp | |||
2017/07/16 | 13:16:48 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/07/17 | 13:14:54 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/07/18 | 13:15:31 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/07/19 | 13:16:16 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/07/20 | 13:16:49 | 0319+415 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 10 | ||
2017/07/21 | 13:20:57 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/07/22 | 13:21:36 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/07/23 | 13:34:22 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/07/24 | 13:22:58 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/07/25 | 13:23:38 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/07/26 | 18:00:49 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/07/28 | 02:42:36 | 1229+020 | 0 | 5~34 | Phase | Amp | |||
2017/07/29 | 13:37:40 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/07/31 | 13:27:05 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/08/01 | 13:28:30 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/08/02 | 13:29:13 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/08/03 | 13:29:59 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/08/05 | 02:35:58 | 1229+020 | 0 | 5~34 | Phase | Amp | |||
2017/08/05 | 13:31:22 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/08/06 | 13:32:06 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/08/07 | 13:32:49 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/08/08 | 13:33:33 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/08/11 | 12:47:49 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/08/12 | 12:43:50 | 0319+415 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 9 | ||
2017/08/13 | 12:39:49 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/08/14 | 12:34:19 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/08/15 | 12:31:50 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/08/16 | 12:27:50 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/08/17 | 12:23:49 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/08/18 | 12:19:49 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/08/19 | 12:15:49 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/08/21 | 12:07:50 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/08/22 | 12:03:49 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/08/23 | 12:14:51 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/08/24 | 11:55:49 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/08/25 | 14:01:50 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/08/26 | 13:57:49 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/08/28 | 01:03:49 | 1229+020 | 0 | 5~34 | Phase | Amp | |||
2017/08/29 | 00:59:49 | 1229+020 | 0 | 5~34 | Phase | Amp | |||
2017/08/29 | 13:49:49 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/08/30 | 13:49:49 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/08/31 | 13:50:49 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/09/01 | 13:51:49 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/09/02 | 13:52:49 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/09/03 | 13:53:49 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/09/04 | 13:54:49 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/09/05 | 13:54:49 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/09/06 | 13:55:58 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/09/07 | 13:56:49 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/09/08 | 13:56:49 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/09/10 | 00:01:49 | 1229+020 | 0 | 5~34 | Phase | Amp | |||
2017/09/10 | 13:57:50 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/09/11 | 13:58:49 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/09/12 | 14:00:11 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/09/14 | 04:15:49 | 2253+161 | 0 | 5~34 | Phase | Amp | Refcal at around 14 UT is also good. | ||
2017/09/14 | 14:01:48 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/09/15 | 14:39:27 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/09/16 | 13:46:56 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/09/17 | 13:47:46 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/09/18 | 14:05:49 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/09/19 | 14:06:50 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/09/22 | 14:08:49 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/09/23 | 14:09:50 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/09/24 | 14:10:49 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/09/25 | 14:17:33 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/09/26 | 14:10:49 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/09/27 | 14:06:49 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/09/28 | 14:02:49 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/09/29 | 14:01:20 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/09/30 | 13:54:50 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/10/01 | 13:50:49 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/10/02 | 13:47:28 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/10/03 | 13:43:25 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/10/04 | 13:40:52 | 0319+415 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 10 | ||
2017/10/06 | 02:42:39 | 2253+161 | 0 | 5~34 | Phase | Amp | |||
2017/10/06 | 13:32:53 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/10/07 | 13:30:22 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/10/08 | 13:26:22 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/10/10 | 02:31:49 | 2253+161 | 0 | 5~34 | Phase | Amp | |||
2017/10/11 | 02:23:50 | 2253+161 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 12 | ||
2017/10/12 | 02:19:49 | 2253+161 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 12 | ||
2017/10/13 | 02:15:49 | 2253+161 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 12 | ||
2017/10/13 | 12:54:23 | 0319+415 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 12 | ||
2017/10/14 | 12:50:22 | 0319+415 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 12 | ||
2017/10/16 | 02:07:50 | 2253+161 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 12 | ||
2017/10/18 | 01:59:49 | 2253+161 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 12 | ||
2017/10/19 | 12:30:22 | 0319+415 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 12 | ||
2017/10/20 | 12:22:22 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/10/21 | 12:22:22 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/10/22 | 12:18:22 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/10/24 | 12:10:22 | 0319+415 | 0 | 5~34 | Phase | Amp | Few frequencies have unusually high amplitudes. | ||
2017/10/24 | 01:35:50 | 2253+161 | 0 | 5~34 | Phase | Amp | |||
2017/10/25 | 01:31:50 | 2253+161 | 0 | 5~34 | Phase | Amp | |||
2017/10/26 | 12:02:22 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/10/27 | 11:58:22 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/10/28 | 11:54:22 | 0319+415 | 0 | 5~34 | Phase | Amp | |||
2017/10/29 | 11:50:22 | 0319+415 | 0 | 5~34 | Phase | Amp | Ant 8 was down. | ||
2017/11/02 | 14:50:49 | 1229+020 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 3 | ||
2017/11/03 | 14:52:20 | 1229+020 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 3 | ||
2017/11/04 | 14:53:51 | 1229+020 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 3 | ||
2017/11/05 | 14:54:50 | 1229+020 | 0 | 5~34 | Phase | Amp | Ant 3 was down. No calibration for: Ant 3 | ||
2017/11/07 | 00:39:49 | 2253+161 | 0 | 5~34 | Phase | Amp | |||
2017/11/07 | 14:56:49 | 1229+020 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 3 | ||
2017/11/08 | 14:57:49 | 1229+020 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 3 | ||
2017/11/09 | 14:58:49 | 1229+020 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 3 | ||
2017/11/10 | 15:00:50 | 1229+020 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 3 | ||
2017/11/12 | 00:22:49 | 2253+161 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 3 | ||
2017/11/12 | 15:02:49 | 1229+020 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 3 | ||
2017/11/15 | 00:12:50 | 2253+161 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 3 | ||
2017/11/15 | 15:07:00 | 1229+020 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 3 | ||
2017/11/16 | 15:08:14 | 1229+020 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 3 | ||
2017/11/17 | 15:09:29 | 1229+020 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 3 | ||
2017/11/19 | 00:13:26 | 2253+161 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 3 | ||
2017/11/19 | 15:11:49 | 1229+020 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 3 | ||
2017/11/21 | 00:11:50 | 2253+161 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 3 | ||
2017/11/22 | 00:10:49 | 2253+161 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 3 | ||
2017/11/22 | 15:15:49 | 1229+020 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 3 | ||
2017/11/23 | 15:16:50 | 1229+020 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 3 | ||
2017/11/24 | 15:18:49 | 1229+020 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 3 | ||
2017/11/25 | 15:19:49 | 1229+020 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 3 | ||
2017/11/26 | 15:20:49 | 1229+020 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 3 | ||
2017/12/03 | 00:05:49 | 2253+161 | 0 | 5~34 | Phase | Amp | |||
2017/12/04 | 15:29:13 | 1229+020 | 0 | 5~34 | Phase | Amp | No calibration on Ant 3 and 6 | ||
2017/12/06 | 00:05:14 | 2253+161 | 0 | 5~34 | Phase | Amp | First refcal on 2017-12-05 is bad. No Ant3 calibration. | ||
2017/12/07 | 00:05:06 | 2253+161 | 0 | 5~34 | Phase | Amp | First refcal on 2017-12-06 had Windscram. No Ant3 calibration. | ||
2017/12/07 | 15:32:07 | 1229+020 | 0 | 5~34 | Phase | Amp | No Ant 3 calibration. | ||
2017/12/08 | 15:33:05 | 1229+020 | 0 | 5~34 | Phase | Amp | No Ant3 calibration. | ||
2017/12/13 | 15:37:19 | 1229+020 | 0 | 5~34 | Phase | Amp | |||
2017/12/18 | 00:06:26 | 2253+161 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 4 | ||
2017/12/18 | 15:40:50 | 1229+020 | 0 | 5~34 | Phase | Amp | No calibration for: Ant 4 Ant 6 | ||
2017/12/19 | 23:57:49 | 2253+161 | 0 | 5~34 | Phase | Amp |